Skip navigation

PCB ASSEMBLY MUSINGS

By Duane Benson

ELECTRONICS ASSEMBLY FILES – WHAT WE NEED! 

Manufacturing is all about taking data from you and delivering some good working circuit boards. Well, it can be just data - as in full turn-key, or data plus some parts and or PC boards, as in a partial turn-key or a kitted job. Regardless of whether you're sending parts and boards, or having us buy everything, we need good data, and a lot of it.

That data is the difference between the working boards you want and need and a random jumble of expensive paper weights.

We need a bill of materials (BOM), the job specifications (which you give us by ordering and describing any special instructions on our web site), and the CAD design files. Fab and Assembly drawings are always a good idea too. A little extra time spent on the files you send us leads to reduced risk, and that's a very good thing.

The CAD design files include Gerbers, a Centroid (AKA pick and place or XYRLS file), and intelligent CAD files, such as ODB++ or IPC-2581. In some cases, such as Eagle CAD, we can use the native CAD board file.

The ODB++ and IPC-2581 file formats are the future of electronics manufacturing. They come with more data, and more accurate data than do Gerbers. If you can send either of these two, please do so. Even if you have those, you should still send us the Gerber files. Gerbers are the lowest common denominator, and provide a base that we and PCB fab houses can work from. 

The Gerbers are a set of files used to create the various layers of the PC board. Each layer requires an individual file, so a six layer board (six copper layers), will typically require at least 13 distinct files: one for each copper layer, top solder mask, bottom solder mask, top silkscreen, bottom silkscreen, the drills holes, and solder paste for the top, and bottom if the board has SMT parts on both sides.

The drill file is combined with the gerbers to line up the via and thru-hole component holes with the appropriate spots in the PC board. Then the pick and place file will tell the assembly house where to put each component, what angle to place it at, and which side of the board it goes in.

Fab drawings hold a human readable, often in PDF format, description of the board and any special instructions needed by the fab house. The assembly drawing would be the same, but for the assembly house.

Sometimes the parts are too densely packed for the reference designators and polarity marks to show up on the actual board, or for aesthetic reasons, the designer doesn’t want them on the board. In such cases, all of that information would be put into a set of assembly drawings - PDF files showing all of the necessary reference information.

The ODB++ and IPC-2581 file formats, as of this writing, still aren’t universally accepted, but are getting more so all the time. Use and promotion of these new intelligent CAD output file formats helps to reduce the number of manual steps and human interpretation, and will eventually lead to better quality and faster manufacturing times.

 

all prod

File Download


   

By downloading this file you are agreeing to receive email regarding software and product updates, industry news and discount codes from Sunstone Circuits. Privacy Policy

  • "Nice file upload system, And the price is a pleasant surprise."
    C. Lane, - Philadelphia, Pennsylvania
  • "Everyone's always friendly, and don't seem to mind (almost expect) that I'm in a rush."
    L. Flath, - Livermore, California
  • When I arrive at the office this morning I was blown away to find that there was a box waiting for me from Sunstone, and it had a complete new set of boards inside. You have amazing customer support and responded to my problem with amazing speed, proven by your ability to turn out a new set of boards and ship them out in a single weekend. Thank you so much for taking the time to do this, I greatly appreciate it.
    Michael Congdon, Starfire Industries - Champaign, IL
  • My first experience in this industry could not have gone any smoother. Beautiful quality and fantastic people to work with. Quick turn around, too! Thank you Sunstone!
    Dan Nardini, MBL
  • Thank you for providing such a good service! I use Sunstone Circuits as my go-to for prototypes and one-off PCB spins. The variety of services that Sunstone provides helps me to reduce cost during the development stage of a product, and to construct quality, one-off board assemblies for devices such as test-fixtures. Populating prototype PCBs in-house provides quick feedback on designs, and the opportunity to bring a board up one section at a time with rework if necessary. It also helps to assure that the documentation our local CMs will be receiving is in good order before the build is outsourced. All of this helps us to locally produce reliable products in a timely fashion, and Sunstone Circuits’ services are an important part of this process. Regarding a case study, now is probably not the time. Our company is growing at a rapid rate, and our processes are adjusting to meet those needs. Thank you for reaching out to offer the possibility for publicity that this could provide, however! I’m glad to know that we are one of your top customers, and I look forward to doing more business with you and your team soon.
    Oliver Greaves , Novacentrix
  • "The process with Sunstone just makes our work life easier. Fast quotes, an expert on the other end of the line-it really supports our competitive advantage."
    Mark Kuhn, Oat Foundry
  • The process was easy and fast. You guys killed it!! Got the pcb looked and worked great. Totally would recommend you guys. Thanks.
    Paul Spears, Pedalrepairs.com
  • "We received the order on time and the boards are exactly as specified – excellent work! The order process was absolutely painless, and we had no holds or other issues. The ability to have you guys convert from my original Altium board file was extremely useful. We will certainly continue to use Sunstone for future circuit board orders."
    Alex M., Customer
  • Hi Bob, and everyone at Sunstone Customer Support. You guys are fantastic. I just received the box of goodies, and it made my day. Your PCB123 software is so much easier to use than any other software I've tried, nobody else can come close to your fast lead times, and your customer support has always been incredible. I would (and do) recommend you guys to anyone looking to design a custom circuit. Thanks again for all you've done over the years. I have some new designs in the works, and will definitely be ordering from you when they are ready.
    Mike Bell, ARCON Welding Equipment
  • Thanks for the e-mail. You are the best and I’m loving our experience with Sunstone so far – smooth ordering, responsive staff, discounts and shipping a day early. I could not be happier and just wanted to express that to you directly!! Hopefully I got the design right this time and we can place a production quantity order in the near future. Thanks again!!
    Jamie C, Customer
  • Your new web site is great and I did use your Customer Support Team this morning to get on the new site and get the new quote. Tim was absolutely great, I wish all the Vendors I deal with worked as effortlessly and helpful because my order and prep for it went smoothly this morning.
    Doug E., WCG
  • I’ve been using Sunstone for decades now, and just like all the projects I’ve done with Sunstone, there were no surprises. Everything went just as it was supposed to, and the board is performing fine. You’re lucky to work for such a great company. In my experience it’s very rare to find the kind of competence and compassion that Sunstone has. You might find one, or the other, but not both. Very rare. Anyway thanks again, if I could I would be working with Sunstone every day.
    Kevin W, Timbercon
  • The boards were perfect, and I built up six, all of which work. I even had to remove some difficult components after I'd soldered them, which required a LOT of heat, and there was no trace delamination! I also learned what changes to make for future PCBs to improve my ability to solder thru-hole components. Sunstone is GREAT, even going the extra mile in both preliminarily reviewing the board after hours on the day of submission (because my designer was leaving on vacation the next day) and the next day making changes to the solder mask that should have been done on my end (after my designer had left!), and I'm recommending Sunstone to anyone I know who needs fast turn around. Thank you once again.
    Steven Martin Cohen, Engineer/Author